How to Frame a Poster

When setting a 30cm square poster in a 50cm square frame, please follow the instructions below.

1. Take out the mat and turn it over.

Remove the mat from the frame and turn it over on a flat surface, such as a desk. The front is ivory and the back is white.

2. Place the poster so that it covers the mat's opening.

The mat opening measures 29 x 29 cm for a 30 x 30 cm poster. Place the poster so that there are no gaps on any side.

3. Attach the included tape in one spot on the top and one spot on the side.

Once the poster is in position, secure two sides with the included tape to prevent it from shifting. Posters expand and contract with humidity, so leave the remaining two sides untaped to allow for movement.

4. Turn it over and check.

After taping the poster, turn it over and check. The included tape is re-positionable, so you can re-apply it.

5. Peel off the protective film from the clear acrylic panel.

Peel off the film from both sides. Since static electricity can occur, it is recommended to clean the work area thoroughly before doing this to prevent dust from adhering.

6. Insert the clear acrylic panel, poster, filler, and backing board into the frame.

Features and considerations regarding the included tape

※ It is a strong-adhesive, re-positionable type using acrylic neutral adhesive, durable and re-applicable.

※ If the tape degrades due to indoor environment or aging, do not try to peel it off forcefully; instead, cut the tape.

※ If the tape peels off or cannot be re-applied due to degradation, we recommend using mending tape as a substitute.